Smart car kit installation guide

Step 1:Insert the fastener into the chassis after tearing off the yellow protection wrap of the chassis, the fastener and the code wheel.

Step 2: Install the code wheel and fix the motor to the chassis. (Attention: the copper sheet of the leading wire of the motor should face outward, the same side of the wheel)

The axis of the code wheel has a broader and a narrower side. Insert the broader side to the motor.

Step 3: Fix the motor to the chassis, then insert and tighten the screws.

Step 4:Hold tight and insert the motor (protection fastener) to the wheel.

Step 5: Insert the spacer, insert the screws from the downside and tighten them from the upper side. Installation completed.